`




Stand 5C55



Manufacturers of Energy and Resource Saving Products



+44 (0) 1424 851659



Cover material that beats algae
and keeps your pool cool

 
 
 
Trade: Find your
Nearest Supplier
 
Pool Owner:
Buy a Cover
 
 

Reflect the sun’s heat away from the pool
Inhibit algae growth
Save money
Reduce filtration/pump time by up to 50%
Eliminate water evaporation by 98% +
  Reduce chemical consumption by up to 70%
Reduce energy consumption by over 50%
Reduce debris contamination
6 year warranty
Winter pool cover


What is a CoolGuard cover?

The innovative CoolGuard cover inhibits swimming pool algae, reflects the sun’s heat and saves money, time, water and energy usage.

The product has an opaque light blue top surface and a black underside. It is this combination that gives a CoolGuard blanket the ability to provide a variety of benefits to the pool owner.

The CoolGuard swimming pool bubble cover material is sold in roll form to fabricators around the world for commercial and domestic use.
  pool blanket

The durable 500 micron pool cover materials used for EnergyGuard, CoolGuard and Sol+Guard are formulated for climate conditions in various continents of the world depending on UV (ultra violet) weathering intensity.

The Sol+Guard and EnergyGuard materials are supplied in two UV formulations: one for areas up to 140 kLys/yrs (Kilolangley years) and one for up to 180kLys/yrs. CoolGuard is supplied for areas up to 180kLys/yrs. The additives we use combine weather and chemical resistant pigments with high performance light, weather and chemical stabilisation. The additives are non-toxic and registered in Australia, Canada, China, EU, Japan, Korea, Philippines and USA.
  CoolGuard swimming pool cover blanket

What is GeoBubble Technology?

Scientifically designed to be more resistant to Ultra Violet (UV) and chemical attack for longer than a traditional shape bubble, and as a result its expected lifespan will increase by 25%+. Eliminating weak and thin points in the material gives a stronger pool cover that can withstand the chemical and UV attack which leads to premature failure. Find out more about GeoBubble technology.
 

Inhibit Algae Growth

The CoolGuard cover inhibits algae growth in outdoor and indoor swimming pools. A Plastipack CoolGuard cover will block the light from entering the water, therefore stopping photosynthesis and inhibiting algae growth.

Research and scientific tests proved that the CoolGuard pool blanket inhibits algae growth even without chemical treatment.

Inhibiting swimming pool algae offers many advantages to the pool owner:

Save money by using up to 70% less pool chemicals
Reduce electricity usage and costs by cutting filtration/pump time by up to 50%
Reduce filter blockages
Lower the risk of eye, ear, skin and gut infections
Avoid slippery surfaces
Improve the aesthetics of the water
Save money and time preparing a pool after the winter period.
  Inhibit algae growth

Inhibit algae growth

Tests prove that the CoolGuard cover works

The pools in the images were both tested for ten days with no chemical treatment, no filtration and with simulated use. The pool shown in the left hand image had a standard solar gain cover and soon went green due to algae growth. The image on the right shows a pool with the Plastipack CoolGuard cover with no algae growth. The test was continued for two months and this pool still remained clear of algae when the test period ended.
 
with or without astandard solar cover

Pool with or without a
standard solar cover
 
CoolGuard

Pool with a
CoolGuard cover

Winter Pool Cover

The CoolGuard cover can be used all year. A test in the UK proved that it has
many benefits as a winter pool cover. A pool was covered with a CoolGuard
cover and a woven mesh debris cover from October 2008 to April 2009. No
winter pool chemicals were used. The water was clear of algae after the 6
month period.

A pool owner will save many hours of pool preparation time by not having to filter, backwash and vacuum the pool, as well as saving money on chemicals and electricity usage.
  Winter cover beneath the snow

Winter Pool Cover

Reduces water temperatures by up to 15%

The colour white is known to reflect the sun’s heat in a very efficient way.

Plastipack has carried out research and produced an opaque reflective light blue colour with similar characteristics.

The sun’s heat is reflected away from the surface of a CoolGuard cover and allows the water surface area directly under the cover to stay cool and refreshing for you to enjoy.

The CoolGuard pool blanket will provide a thermal barrier to prevent the absorption of the sun’s energy.
  Reflect the sun’s heat

Reflect the sun's heat

Reduce Filtration/Pump Time by up to 50%

Filtration time can be cut by up to 50% when algae growth is inhibited. This
will greatly reduce your electricity usage.

Filtration will still be required to remove dirt/impurities from the pool and to
circulate the water. A 50% reduction is achievable with regular pool use/bathing
loads. If the pool is heavily used there will need to be more filtration.
   

Reduce Chemical Consumption by up to 70%

You can reduce chemical usage because the CoolGuard cover inhibits algae
growth and eliminates water evaporation.

A CoolGuard cover will provide cost savings by using less chlorine because
algae growth will be inhibited by physical means rather than chemical means.

The CoolGuard cover also reduces chemical degradation from photolysis. About
90% of chlorine consumed by outdoor pools is lost due to photolysis reaction.

Additional cost savings will be made by using less pH plus/pH minus to correct
any pH imbalance caused by algae.

All chemical levels and treatment should be maintained at the manufacturers
recommended level.
   

Eliminate Water Evaporation by 98% +

With a CoolGuard pool cover you will be able to eliminate water evaporation
by over 98%, thus greatly reducing your water consumption and your water
charges, as well as saving a vital natural resource. Plastipack carried out research, in collaboration with the Brighton and London Metropolitan Universities, which proved that the evaporation loss in the UK for an average sized pool, 4m x 8m, is approximately 32,000 litres per year. This figure is considerably higher
for hotter climates and windy conditions.
  Eliminate waterevaporation by 98%

Eliminate water
evaporation by 98%

Reduce Energy Consumption by over 50%

You can reduce your pool heating costs because a CoolGuard cover will eliminate evaporation and greatly reduce heat radiation. Plastipack’s heat retention tests carried out in collaboration with the Brighton and London Metropolitan Universities, showed conclusive energy savings of over 50%.

This applied to oil, gas, electric heater or heat pump usage. Where solar heating is used, it is possible to invest in up to half the amount of panels normally required for a pool without a cover.

  Reflect the sun’s heat

Retain heat
Reduce Debris Contamination

Debris such a leaves, dirt, insects and bird droppings are not only unsightly in
a pool but also provide nutrients for algae and bacteria to feed on. When the pool is covered these contaminants will be kept out of the water, greatly improving the quality and appearance of the water.
 

Save Money

A CoolGuard cover will save money by reducing water, heating, electricity and chemical costs. The CoolGuard pool blanket can pay for itself in less than a year.

Dubai Case Study (2011)
– A CoolGuard swimming pool cover can pay for itself in less than 1 year:
Savings: Money saved on an 8 x 4 meter pool
Water
32,000 litres of water per year (this could provide you with approximately 500 baths!)
£90*
Heating/Electricity
Up to 25,000 kWh of electric every year when using a modern heat/cooling pump over a 12 month swimming pool season
£1180*
Chemicals
Up to 7kg of chlorine
£50*
Total savings £1406 per year*

*
calculations based on the use of a CoolGuard swimming pool cover on a 4 x 8 metre pool in Dubai at rates of: 0.88p per 1,000 litres of water, 0.074p per kWh of electricity and £7.10 per kg of chlorine.

Warranty


The CoolGuard cover with GeoBubble technology has a 6 year pro rata warranty.. The Sol+Guard and EnergyGuard materials are supplied in two UV formulations that are covered by our pro rata 6 year warranty. Please note that the length of the warranty may vary in some countries.


Environmental Benefits

By reducing the amount of energy needed to heat and filter your pool water, a CoolGuard cover will greatly reduce your carbon footprint. It also conserves water and, at the end of its life, a Plastipack cover is 100% recyclable.


Testimonial

“Finally a product designed with the Middle East climate in mind! We started working with this cover last year and it’s the product we have been waiting for, it requires very little selling as it saves electricity, water and chemicals, it looks good and will last a number of years out here in the constant sunshine. Our sales are increasing as people become aware of the product and the financial and environmental savings it offers”

Jon Maskell, Manager, Certikin Middle East FZE


Remember to use a Reflective Storage Cover to
protect your stored swimming pool cover from permanent solar damage.
Plastipack products are available in
2m and 2.5m widths as standard.
Find out more about flexible ordering


Back|Home|Sitemap

Wainwright House, 4 Wainwright Close, Churchfields Industrial Estate, St Leonards-on-Sea TN38 9PP, UK
Tel: +44 (0) 1424 851659 - Fax: +44 (0) 1424 853909 - email us


© Plastipack Limited. Images on this site are for illustration purposes. Products supplied may differ in colour and tone.

CoolGuard™, EnergyGuard™, Sol+Guard™, GeoBubble™ and VapourGuard™ are trademarks of Plastipack Limited.

Patent applied for CoolGuard™ No. 0820437.2, EnergyGuard™ No. 0820440.6,
Sol+Guard™ No. 820435.6 and GeoBubble™ No. PCT/2010/001851

Related websites: GeoBubble | VapourGuard

Web design by 1066 Internet Privacy Policy|Cookies Policy|Terms & Conditions Translations by Tounge Tied